JAPAN--SIM-Drive Corporation (head office: Kawasaki City; president: Hiroshi Shimizu), which aims to make use of electric vehicles widespread through its high technological capabilities and new open-source business model, recently completed “DS3 Electrum” (Picture1, Table 1). “DS3 Electrum” was the world premiered in the Paris Motor Show 2012. SIM-Drive developed “DS3 Electrum”, which based on the commercial car, as an “on-board direct-drive” electric vehicle. The purpose is to confirm the efficiency and high versatility of the direct drive motor made by SIM-Drive.
Please see the link below for details.
» Press Release (0116DS3e_eng.pdf) 334KB
“On-board-direct-drive” (Figure 1) is a method through the drive shaft by mounting one by one to the left and right drive wheels direct drive type motor. Without using a reduction gear between the motor and the wheel, we made it possible to drive by driving high efficiency. Since the motor is housed in the hood, can be realized without changing the existing structure of the suspension has become possible. As a result, the application of this technology is also available in the type of electric vehicle conversions. “DS3 Electrum” equip with all features as electric vehicles, using only the front hood space and fuel tank space without touching interior and trunk space at all.
We do not intend sales of “DS3 Electrum” at the moment.
Moreover, the following characteristics of DS3 Electrum are also worthy of special mention:
Picture 1
Figure 1
Overall Length/Width/Height |
3,965mm/1,715mm/1,455mm |
Vehicle Weight |
1,285kg (original 1,190kg) |
Number of seat |
5 people |
Drive System |
PM type Synchronous 3-Phase electric motor |
Drive |
2 motor, front wheel drive |
Range per charge (JC08 mode) |
154km |
Driving energy consumption (JC08 mode) |
113.6Wh/km |
Maximum output |
65kW(88ps) (per one motor) |
Maximum torque |
680Nm/0~900rpm (per one motor) |
0→100km/h acceleration |
9.8 seconds |
Battery capacity |
17.5kWh(Lithium ion battery) |
Table 1. Spec of DS3 Electrum (SIM-Drive Concept)
SIM-Drive Corporation PR Office: Yuta Asao
E-mail: contact@sim-drive.com TEL:+81-44-201-1014